Portable Compressor 7/20
9---10
SEPTEMBER 2003
9.25.
TORQUE VALUES
Refer to
Table 9---2. TORQUE VALUES.
Table 9-- 2.
TORQUE VALUES
Nm (lbf ft)
Engine mounts to engine
39÷47 (29÷35)
Airend to pivot plate
39÷47 (29÷35)
Air filter to bracket
22÷27 (16÷20)
Autella clamp to exhaust
12÷15 (9÷11)
Cooler wall to frame
12÷15 (9÷11)
Discharge manifold to frame
39÷47 (29÷35)
Pulley to flywheel
77÷93 (57÷69)
Drop Leg
72÷85 (53÷63)
Engine/airend to chassis
73÷78 (54÷58)
Band clamp on discharge hose
78÷91 (58÷67)
Exhaust flange to manifold
23÷28 (17÷21)
Fan guard
12÷15 (9÷11)
Fan to hub
16÷20 (12÷15)
Lifting bail to frame
39÷47 (29÷35)
Band clamp on oil pipes
96÷119 (71÷88)
Radiator/Cooler to baffle
12÷15 (9÷11)
Running gear rear to chassis
82÷93 (63÷69)
Running gear drawbar to axle
39÷47 (29÷35)
Main pivot bolt
143÷180 (106÷133)
Pivot locking bolt
73÷78 (54÷58)
Separator tank cover
54÷68 (40÷50)
Separator tank to frame
24÷30 (18÷22)
Band clamp on hose
143÷180 (106÷133)
Wheel nuts
67÷109 (50÷80)
9.26.
COMPRESSOR LUBRICATION
A. Portable Compressor Fluid Chart
Refer to
Table 9---3. COMPRESSOR LUBRICANTS,
these charts
for correct compressor fluid required. Note that the selection of
fluid is dependent on the design operating pressure of the
machine and the ambient temperature expected to be
encountered before the next oil change.
