Ingenium 2E2S, Technical Installation Manual, Page: 86 / 196

86
sensors > flooding
á SIn-BUS
Ref.
B A
+12V
ingenium
www.ingeniumsl.com
·
Sin-BUS
Vertical detector to be connected
to BUSing®via cable.
• BUSing® connection
• Vertical mount
• Size: 34 x 70 x 14mm
Description
These devices have terminals with sensors that detect water. They are to be installed vertically with the bottom flap
touching the ground. For an alarm to sound, the water must be in contact with both metal terminals.
• They should be located in areas of water leaking risk.
• On sloping ground, should be placed at the points where, by fall, the water tends to accumulate.
• Can be installed hidden, because its function is to send information to the automation system.
Configuration using Development System (SIDE)
• 2 programmable scenes for activation and deactivation of the sensor.
• Up to 60 programmable BUS events for each scene
.
Technical Characteristics
Device
Reference
Sin-BUS
Voltage
Supply
9–16V DC (BUS)
Current
Consumption
40mA (BUS)
·
Sin-BUS
BUSing® flood sensor
Allows the detection of water leaks in the installation.