manualshive.com logo in svg

Ingenium 2E2S, Technical Installation Manual, Page: 114 / 196

Share
Download
Ingenium 2E2S Technical Installation Manual Download Page 114

114

clima

·

BUSing-DKAC-IR

BUSing® – DAIKIN air conditioning gateway with IR control

Allows control by BUSIng® of an air conditioning DAIKIN device  

Description

Gateway suitable for integration of DAIKIN air conditioning system with the BUSing® system control.

Through its infrared emitter connects wirelessly to a DAIKIN domestic air conditioner unit.

It allows to control set-point temperature, current temperature, function modes (cold, heat, ventilation, drying or auto-
matic) and fan speed (low, medium, high or auto).

Installation Details

• Device’s IR receiver allows to keep updated on the BUSing® system control the state of the air conditioning unit. So this

IR receiver must stay uncovered and accessible by the remote control of the AC unit.

Technical Characteristics

Device
Reference

BUSing-DKAC-IR

Voltage
Supply

9–16V DC (BUS)

Current
Consumption

40mA (BUS)

No. AC units
Controllable

1

á 

BUSing-DKAC-IR

pasarela IR Daikin¨
Daikin¨ IR gateway

ingenium

www.ingeniumsl.com

+12V

A

B

Ref.

EMI

REC

• Suitable for domestic installations

• Connects to the DAIKIN unit by infrared

• Controls one DAIKIN unit

• Mounting hidden next to AC device or ceiling integration

• Size: 37 x 77 x 17mm

Summary of Contents for 2E2S





































































































































































































Reviews:

No comments