Ingenium 2E2S Technical Installation Manual Download Page 16

Page: 16 / 196

touch-buttons & thermostats

Cubic-VH

Vertical touch panel for hotel room door - MUR/DND

To monitor the status of hotel rooms by BUSing®.

• Slim design with integral front in customizable glass

• 1 touch area for bell

• 2 signalling icons for room status

• Rear case available in white or black

• Mounted on universal box, screwed on wall

• Size: 88 x 129 x 6mm (vertical/rectangular format)

Description

BUSIng® device for placement in hotel room doors. It incorporates a capacitive touch area for room bell.

It has two signaling icons to distinguish between the room status: Do not disturb / Make up the room.

Customization

This device is available with the second level of customization:

[2]

design

print customizable front glass with back casing in white or black.

Technical Characteristics

Device
Reference

Cubic-VH

Voltage
Supply

9–16V DC (BUS)

Current
Consumption

20mA (BUS)

ingenium

Summary of Contents for 2E2S





































































































































































































Search results

Summary of Contents for 2E2S

Reviews:

Ingenium 2E2S, Technical Installation Manual, Page: 16 / 196

Search results

Summary of Contents for 2E2S

Reviews: