Ingenium 2E2S, Technical Installation Manual, Page: 48 / 196

48
security
·
RFiD-BUS
BUSing® - RFID smart cards reader
For access control through RFID cards.
á RFID-BUS
ingenium
www.ingeniumsl.com
• Allows to program 255 identifiers (IDs) per device
• Permission or time restriction for 5 different levels of users
• 3 operational modes: push button, long/short and switch
• Output to transistor (300mA, minimum 30V DC) to connect to the lock
• Screw mounting on universal mechanism box
• Size: 55 x 55 x 10mm
Description
Device designed to be use with smart/intelligent cards (reference: TjRFiD).
Each device allows to read, control, interpret and program up to 255 users with different identification (255 users per device).
The card reader will distinguish the card to read, interpret and execute actions that have been programmed on it.
An specific schedule can be assigned to a each card to allow or restrict access to a particular personal stay level. This
schedule can be programmed easily subdivided at intervals of 30 minutes for each of the seven days of the week to five
user levels 0 through 4.
This device is also used, together with the Software Control for Hotels (reference: SH-PC), to program smart cards and ac-
cess controls to rooms, common zones, privates areas, etc. You can also use it to activate/deactivate intruder alarms.
Operating Modes
• Push button mode: executes programmed scenes by change of flank.
• Switch mode: executes programmed scenes by level (ascendant flank-descendant flank).
• Long/short mode: distinguishes long/short detection of the RFID card.
Technical Characteristics
* transistor outputs with open collector
** (125MHz)
Device
Reference
RFiD-BUS
Voltage
Supply
9–16V DC (BUS)
Current
Consumption
50mA (BUS)
No.
Outputs
1*
Max. Voltage
in Outputs
30V DC
Max. Current
in Outputs
300mA
Compatible
Cards
UNIQUE,
EM 4102**
Max. Distance
to read
20cm (approx.)