IPA280 – User guide
•
38/43
Copyright © 2010 Ingenico
9000002522 R11 000 02/1002
All rights reserved
6.
Maintenance
ATTENTION
Before making any operations of maintenance in the terminal, make sure that
the power supply is disconnected.
6.1.
Paper roll
Characteristics
Precisions
Type
Reference: TF50-KR2 (NPI)
Colour
White
Length
Around 7 M (depending on paper roll type)
Width
58 mm
Diameter
24.7m/m +0.5m/m-0.5m/m
•
The thermal paper can be deteriorated by poor storage conditions, so we
recommend you to avoid:
–
storage in hot wet places (near to air-conditioner, humidity higher than 85%)
–
exposure to sunlight or ultraviolet for long periods
–
contact with organic solvents (solvent type adhesive)
–
direct contact with materials containing plasticizers (PVC transparent
folders or envelopes)
–
direct contact with «diazo» papers
–
direct contact with water
–
Rubbing or pressing the paper too strongly
CAUTION
In order to benefit from the complete guarantee of the product,
only heat
sensitized paper approved by the manufacturer can be used
.
6.2.
Cleaning of the terminal
First of all, unplug all the wires from the terminal.
Good rules for proper cleaning of the terminal are:
•
Use a soft cloth that is very slightly soaked with soapy water to clean the outside of
the terminal.
•
Do not clean the electrical connections.
•
Do not use in any case, solvents, detergents or abrasive products:
Those materials might damage the plastic or electrical contacts.
•
Avoid exposing the terminal to the direct rays of the sun.
•
Do not put anything into the slot of the smart card reader
