IPA280 – User guide
•
8/43
Copyright © 2010 Ingenico
9000002522 R11 000 02/1002
All rights reserved
3.4.
FCC & IC compliance
FCC & IC has a specific naming.
The references uses for FCC & IC certifications are:
•
IC: 2586D-IPA280
•
FCC ID: XKBIPA280
3.4.1.
FCC Statement
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may cause
undesired operation of the device.
3.4.2.
RF Radiation Exposure Statement
For body worn operation, this device has been tested and meets RF exposure guidelines
when used with an accessory that contains no metal and that positions the device a
minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance
with RF exposure guidelines.
Annex
Suggested text for the notice indicating compliance with this standard:
This Class [B] digital apparatus complies with Canadian ICES-003.
