Ingenico iPA280 User Manual Download Page 10

Page: 10 / 43

IPA280 – User guide

•

10/43

9000002522 R11 000 02/1002

3.5.

Water protection

SAM support lid

The SAM sliding lid located under the terminal (see chapter “Installation SAM”) must be in
place during normal operation of the terminal.

Headphone lid

The headphone lid is located on the side of the terminal must be in place
during normal operation of the terminal

SD Card lid

The SD card lid is located on the side of the terminal must
be in place during normal operation of the terminal

Cable lid

The cable lid is located under the terminal (see chapter “Installing
the iPA280”) must be in place during normal operation of the
terminal.

It shall be in connection configuration when the iPA280 is
connected into the cradle:

SPM Smart Card Rubber Cover

A cover for the smart card connector entrance is attached to the
side of the PDA. It must be placed on the connector when the smart
card  reader  is  not  used  in  order  to  protect  against  unwanted  liquid  or
dust.

Summary of Contents for iPA280











































Search results

Summary of Contents for iPA280

Reviews:

Related manuals for iPA280

Brands by name

Popular brands

Ingenico iPA280, User Manual

Search results

Summary of Contents for iPA280

Reviews:

Related manuals for iPA280

Brands by name

Popular brands