Ingenico iCT2XX Operating Manual Download Page 52

Page: 52 / 147

SKYZER TECHNOLOGIES

PAGE 52 OF 147

INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL

Version 1.00

5.0

PLEASE WAIT

Terminal displays

PLEASE WAIT

while retrieving the default merchant

configuration.

6.0

EFTPOS

MEMORY RESET

Terminal prompts

EFTPOS MEMORY RESET

while resetting the merchant

configuration and returns to idle.

NOTE:

The above function is performed to delete the configuration for the

selected merchant only.

5.6 Remote Key Injection (PKMS)

The Ingenico ICT2XX terminal supports Remote Key Injection technology to
enable automated injection of security keys from Paymark.

5.6.1

Remote Key Injection (PKMS) Configuration

This function is used to configure the Remote Key Injection operation and can
be performed through Dial-up, TCP-IP (Broadband) and GPRS mode.

5.6.1.1 Dial-up RKI Configuration

Step

Terminal Display

Description

1.0

Press

FUNC

2.0

FUNCTION?

Enter

7418

, press

ENTER

Summary of Contents for iCT2XX




















































































































































Search results

Summary of Contents for iCT2XX

Reviews:

Related manuals for iCT2XX

Brands by name

Popular brands

Ingenico iCT2XX, Operating Manual

Search results

Summary of Contents for iCT2XX

Reviews:

Related manuals for iCT2XX

Brands by name

Popular brands