SKYZER TECHNOLOGIES
PAGE 102 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
1.0
TIPPING
1.AUTHORISATION
2.TIP ADJUST
3.UTIL
Press
ENTER
to scroll through the menu options until the
TIPPING
menu is
shown on the display.
Press
3
to select
UTIL.
2.0
SELECT FUNCTION
1. VOID TIP
2. UPLOAD
3. PRINT
Select the desired function by pressing the corresponding number key.
Example: Select 2 to perform
UPLOAD FUNCTION.
3.0
TIP TRANSACTIONS
TOTAL $XX.XX
TOTAL OK? Y/N
Displays the total tip transactions that are currently stored on the terminal.
(
NOTE:
Check to see if the Total Amount matches the Total Amount of your tip
transaction receipts)
If the
TOTAL
is correct, press
ENTER
to upload the stored TIP transactions and
if the
TOTAL
is not correct, press
CLEAR
to exit and proceed with
step
6.0
4.0
PROCESSING NOW
X OF XX
PROCESSING NOW X OF XX
displays while uploading the stored tip
transactions and once finished, returns to idle screen.
Example: Processing 1 of 10, etc.
5.0
TRANSMISSION
COMPLETE
Once all the transactions are sent, the screen will display
“TRANSMISSION
COMPLETE”
6.0
VIEW TRANS Y/N
Press
ENTER
to view transactions to modify the tip transaction amounts of the
stored advices or
CLEAR
to exit and return to idle screen.
NOTE
: If the terminal is in the process of uploading the stored tip transactions to
Paymark network and merchant wishes to use the EFTPOS terminal, they can
interrupt the upload by simply swiping the card at any stage where it may take
few seconds before terminal prompts
“TEMPORARILY HA
LT TRA
NSMISSION Y/N”.
The merchant can then press
ENTER
to halt the upload transmission and
perform a transaction or
CLEAR
to proceed with uploading stored tip
transactions.
11.9.6
Printing Tips
This function allows the merchant to print the pending tip transactions
individually that are currently stored on the terminal.
Step
Terminal Display
Description
1.0
TIPPING
1.AUTHORISATION
2.TIP ADJUST
3.UTIL
Press
ENTER
to scroll through the menu options until the
TIPPING
menu is
shown on the display.
Press
3
to select
UTIL.
