EonStor F16F-R/S4031 Installation and Hardware Reference Manual
diagrammed below. Use a medium-size Phillips screwdriver
to remove the screw. (See
Figure 5-12
)
Figure 5-12: Loosening the Retention Screw
NOTE:
Do not remove the wrong screw. Two screws can be found on the
faceplate. One secures the module to the chassis while the other secures
the faceplate to the metal bracket.
Step 3.
Remove the faulty module.
(See
Figure 5-13
)
Figure 5-13: Removing the Host Connection Module
NOTE:
A label with board serial number comes with the replacement board. You
may attach the sticker to the bottom side of the metal bracket before install
the replacement. The serial number can be used for future reference.
Step 4.
Install the I/O module
by aligning the host connection
module to the module bay. There are guide rails along the
interior of the module bay. Insert the module properly and
gently sliding it into until the back-end connectors are
mated. (See
Figure 5-14
)
5-14
Replacing an I/O Module
