InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 68 / 128

68
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Select Super/Subscript Printing
(For Hanzi BIG5 Printer only)
ASCII Code SSCC
~
n
Hex Code SSCC 7E
n
Dec Code SSCC 126 n
Purpose Prints characters that follow at about 1/2 their normal width and
1/2 their normal height; the printing location depends on the
value of
n
as follows:
n = 0 or 48 Upper part of the character space
n = 1 or 49 Lower part of the character space
n = 2 or 50 Normal character
Where:
n = 0, 1, 2, 48, 49, 50
Comment Setting n =2 returns the character back to its normal height.
Select Typeface (For Hanzi BIG5 Printer only)
ASCII Code ESC k n
Hex Code 1B 6B
n
Dec Code 27 107 n
Purpose This is to select DBCS ASCII typeface:
n = 0 Normal
n = 5 OCRB
Where:
n = 0, 5
Comment This command only takes effect in DCBS mode.
Select Underline Printing (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T - n
Hex Code ASSC 30 54 2D n
Dec Code ASSC 48 84 45 n
Purpose To set underline printing.
Where:
n = 0x30: reset (default)
n = 0x31: underline for all characters
n = 0x32: underline for all characters except space (0x20).
Comment This control code does not function while in non-DBCS mode.