InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 69 / 128

Select Vertical Printing (for Hanzi BIG5 Printer only)
69
Select Vertical Printing (for Hanzi BIG5 Printer only)
ASCII Code SSCC +
n
Hex Code SSCC 2B n
Dec Code SSCC 43 n
Purpose The character is printed with different degrees of rotation in the
counter-clockwise direction under DBCS mode.
n
= 0 or 48 90 degrees rotation
n
= 1 or 49 180 degree rotation
n
= 2 or 50 270 degree rotation
n
= 3 or 51 rotate DBCS full width character 90 degrees
n
= 4 or 52 normal character
Where:
n = 0, 1, 2, 3, 4, 48, 49, 50, 51, 52
Comment The default value is n = 4, normal character.
NOTE: This command is only supported in the Hanzi TW printer.
Select Vertical Tab Channel
ASCII Code ESC / c
Hex Code 1B 2F c
Dec Code 27 47 c
Purpose Selects a vertical tab channel set by ESC b.
Where:
c = 0 through 7
Comment Subsequent VT (hex 0B) commands use tab table specified by
c. If no tab table is selected, table 0 is used.
Set 0-dot Intercharacter Spacing of DBCS Characters
ASCII Code SUB Q
Hex Code 1A 51
Dec Code 26 81
Purpose Sets 0-dot intercharacter spacing of DBCS characters.
Comment This command affects the front panel setting of “DBCS CPI.”