InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 60 / 128

60
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Master Select One-Line Attribute in DBCS Mode
ASCII Code ASSC 0 !
n
Hex Code ASSC 30 21 n
Dec Code ASSC 48 33 n
Purpose Where:
0 < = n < = 255
Select any combination of several one-line attributes by setting
or clearing the appropriate bit in the
n
parameter, as shown in
Table 7.
Comment These attributes are canceled when the printer receives the
following commands: LF, FF, VT, and CR.
This command takes effect only in DBCS mode.
Printer Deselect
ASCII Code DC3
Hex Code 13
Dec Code 19
Purpose Places printer in the deselected state.
Comment The configuration parameter Printer Select must be set to
Enable.
When the printer receives this command, it ignores data until a
DC1 (Printer Select) command is received.
Table 7
Bit On/Off Hex Dec Function
2 Off
On
00
04
0
4
Cancel double width
Select double width
3 Off
On
00
08
0
8
Cancel double height
Select double height