InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 62 / 128

62
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Select Autowrap Mode (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T m n
Hex Code ASSC 30 54 6D n
Dec Code ASSC 48 84 109 n
Purpose To set Auto Line Feed
Where
n = 0x30: reset auto LF (default)
n = 0x31: set auto LF
Comment This control code does not function while in non-DBCS mode.
Select Bit Image
ASCII Code SSCC * m nL nH d1...dk
Hex Code SSCC 2A m nL nH d1...dk
Dec Code SSCC 42 m nL nH d1...dk
Purpose Prints dot graphics in 12- or 16-dot columns, depending on the
following parameters:
Where:
0 < = nL < = 255
0 < = nH < = 31
m = 30, 31, 32
m specifies the dot density.
nL nH specifies the total number of columns of graphics data
that follow (number of dot columns) = ( nH x 256 + nL )
d1...dk bytes of graphics data; k is determined by multiplying
the total number of columns times the number of bytes required
for each column.
Parameter
m
in ESC *
Horizontal
Density (dpi)
Vertical
Density (dpi)
Dots per
Column
Bytes per
Column
30 90 90 12 2
31 120 120 16 2
32 90 90 16 2