InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 29 / 128

CC DOS Control Code
29
CC DOS Control Code
ASCII Code ESC I
n
Hex Code 1B 49 n
Dec Code 27 73 n
Character Pitch 10 CPI
ASCII Code ESC P
Hex Code 1B 50
Dec Code 27 80
Purpose Sets character pitch to 10 characters per inch (cpi).
Comment This command is available in all print modes except DBCS
mode. This command is normally used to cancel 12 cpi. This
command affects the front panel setting of cpi.
Character Pitch 12 CPI
ASCII Code ESC M
Hex Code 1B 4D
Dec Code 27 77
Purpose Sets character pitch to 12 characters per inch (cpi).
Comment This command is available in all print modes except DBCS
mode. This command affects the front panel setting of cpi.
Table 4. CC DOS Control Code Parameters
Value of n Function
A Characters print normal size.
B Characters print double width, in both ASCII and Hanzi
mode.
C Characters print double height, only in Hanzi mode.
D Characters print double width and double height, but
double height only prints in Hanzi mode.