InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 81 / 128

Set Relative Horizontal Print Position In 1/120 Inches
81
Set Relative Horizontal Print Position In 1/120 Inches
ASCII Code ESC \
n1 n2
Hex Code 1B 5C n1 n2
Dec Code 27 92 n1 n2
Purpose Moves the simulated print head to a relative horizontal print
position (in dots), using 1/120 inch increments in Near LQ
mode and 1/180 inch increments in all other modes.
Where:
n1
= 0 through 127
n2
= 0 through 255
Comment Adds ( n1 + ( n2 x 256)) dots to the horizontal position of the
simulated print head. The number sent is two's complement,
with negative numbers moving to the left. The command is
ignored if it would move the simulated print head beyond the
page margins.
Set Right Margin (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0 T Q n1 n2 n3
Hex Code ASSC 30 54 51 n1 n2 n3
Dec Code ASSC 48 84 81 n1 n2 n3
Purpose To set margin in 1/10 inches (10 CPI equivalent) according to
the number of half-width characters.
Where
n1, n2, n3 = 0x30 ~ 0x39
Comment This control code does not function while in non-DBCS mode.