118
Important Safety Information
Please read before proceeding
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DO NOT place objects on top of the device, as objects may scratch the screen.
DO NOT drop your device or subject it to severe impacts. Bending the body and
pushing the display or keys with extreme force could damage the device.
DO NOT use a pen or any sharp object to tap the screen.
DO NOT expose the device to dirty or dusty environments.
DO NOT place the device on an uneven or unstable surface.
DO NOT insert any foreign objects into the device.
DO NOT expose the device to strong magnetic or electrical field.
DO NOT use or store this equipment in a place where it will be exposed to high
temperatures, such as near an open flame or heat-emitting equipment.
DO NOT use it or store it where fluids such as water can splash onto it. Raindrops,
water spray, juice, coffee, steam, or other types of liquids will also cause
malfunctions.
Using this device for long periods of time may cause the device to get warm. If you
feel the device is too warm, avoid sustained contact with exposed skin otherwise
this might cause discomfort, or eventually a burn.
Refer to the rating label on the device and be sure that the power adapter complies
with the rating. Only use accessories specified by the manufacturer.
Disconnect the device from an electrical outlet and power off before cleaning the
device.
NEVER attempt to connect or disconnect the power adapter with wet hands.
Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly
before cleaning. Never use abrasives or cleaning solutions.
DO NOT disassemble the device. Only a certified service technician should
perform repair.
Please check with your Local Authority or retailer for proper disposal of electronic
products.
For USB connection, users must use a USB 2.0 (or higher version) cable.
Please make sure the temperature for adapter will not be higher than 50
°
C.
Do not store your phone in temperatures higher than 50
°
C.
The operating temperature for this device is from 0
°
C to 50
°
C.
The adapter shall be installed near the equipment and shall be easily accessible.
The temperature of the device might increase while the CPU is busy handling
resource consuming activities such as high resolution video decoding. The SW
protection mechanism will ensure stop charging whenever the temperature is over
the predefined threshold and prepare for shut down if necessary. Please worry not.
Summary of Contents for IN610
Page 1: ...User Guide IN610 ...
