Inficon Protec P3000, Translation Of The Original Operating Manual, Page: 35 / 128

Operation of the Protec P3000
35
ZERO Button
When shortly pressing the zero button, the zero level will be updated. For details on
the ZERO function see Section
4.4.1 .
List of gas parameters button
Up to four different gas parameter sets can be stored in the Protec P3000. If more
than one set of gas parameters are set-up, the list button on the right side of the
display will appear in the menu screen. When pressing this button, a new set of gas
parameters (e.g. different refrigerant equivalent, different trigger level, etc) can be
selected. For details on how to set up the different gas parameters see section
4.3.1 .
Info Button
When pressing the
i
info button (bottom right side of the display) information on the
status of the Protec P3000 will be displayed. For details see section 3.4.3 .
Status Line
In the bottom line of the main display status information is indicated. First the
currently selected volume for the audio alarm is stated. Next, a small black triangle
with an exclamation mark may indicate an active warning.
Lock Softkeys
The keys C
AL
, Z
ERO
und can be locked. So the settings of these functions can
be protected, see “Settings > Display > Function keys“.
Fig. 20 Function key