Industrex M43ic, Instruction Manual

Page: 42 / 51

Industrex M43ic / M43icN
page 36 01/2013 TK
2. Weekly maintenance
*) Wipe
external surfaces of film processor / enclosures / panels
with a wet cloth to remove any chemical / dirt deposits.
*) Inspect and clean the wash tank and
intermediate water rins drains. If algaes
present then the should be removed,
in such a case we suggest to use a proven
algae control system
11. MAINTENANCE
The filmprocessor is designed to produce consistent high quality production with the minimum
of maintenance.
Regular maintenance minimizes the chances for equipment failure and loss of
processing quality. A a well trained person has to be responsible for performing the maintenance
of the filmprocessor and must be familiar with the operation and function of the
processor as well.
1. Daily maintenance
*) Check levels of the external replenishmener tanks -
If necessary mix fresh solution.
*) Cleaning feed tray.
*) Cleaning spray-bar-guide for the fixer
*) Before starting production we advise to feed some
cleaning films to remove any overnight residue.
*) Use the supplied "spray-bottle" to remove any deposits
from the drive gears - as shown below:
*) Check the shown drain pipes and overflow
tubes - remove any deposits to prevent
blockad of the drain.
Spray-bottle