Industrex M43ic, Instruction Manual

Page: 10 / 51

page 4 01/2013 TK
Industrex M43ic / M43icN
Top cover
CAUTION
CAUTION
DANGER
Main switch of
the film processor
1.1.2 Qualified staff and system operation
CAUTION:
Only trained staff to be allowed to unpack or operate the
device. Only trained service engineers are allowed to work
on the equipment and electrical installation.
Staff in charge of maintaining the processor (see chapter 11and 12) need to be thoroughly
familiar and trained with the equipment. The equipment should not be operated without
supervision.
Only the top cover of the film processor may be removed by the operator (see picture
below)
CAUTION:
The installation, service, repair as well as the initial operation of
the machine must be carried out by qualified and trained service
personnel only !
Carry out the following steps prior to removing the top cover:
1. Give instructions to the operators of the film processor.
2. Switch off the main power switch („0“-position)
The film processor is a complex machine with moving parts such as
rotating gears and roller components. It uses photo processing
chemicals which are irritating to eyes, lungs and skin. High voltage is
used to power the film processor.
DANGER:
Do not operate the film processor after consuming alcohol or
taking strong medication.