Industrex M43ic, Instruction Manual

Page: 34 / 51

Industrex M43ic / M43icN
page 28 01/2013 TK
S-bar: --------- This feature is used to check each sensor of
----------- the sensor-bar. In the processor there are
6 sensors integrated. To check the sensors, follow
the instructionen underneath:
-put a small film under the sensorbar (don’t feed into the
filmprocessor)
-move the film as shown underneth
-at the same time take a look to the display
H1=0 H2=0 Hd1=1 H1=1 or 0 heater tank1 On or OFF
Hd2=0 Fan=1 Ws=1 H2=1 or 0 heater tank2 On or OFF
Hd1=1 or 0 heater dry 1 On or OFF
Hd2=1 or 0 heater dry 2 On or OFF
Fan=1 or 0 Dryer fan On or OFF
Ws=1 or 0 Wash valve On or OFF
Motor Off / On Motor is On or Off
Speed 19 001 19 speed
001 re-impulses from the motor
Normal s-bar A normal 6-sensor sensorbar is recognized
Area=0.0000 sqm. Value of the given filmaera until to the next
replenishment cycle
Refill1 0000
Refill2 0000
see "Automatic Developer and Fixer tank fill" on page 27
That means sensor
3 and 2 are occupied
That means sensor
1 and 0 are occupied
S-bar: ---------
---------10
S-bar: ---------
-------32--
Sensor
5 4 3 2 1 0