Industrex M43ic / M43icN
page 15
01/2013 TK
4. WORKING WITH THE FILMPROCESSOR
IN THE MORNING
*)
Turn on water supply.
*)
Check replenishment tank levels.
*)
Check whether that the water drain tap is closed
*)
Switch on the Filmprocessor with the Filmprocessor main switch (position „1“).
*)
Wait for the "READY" of the processor
STARTING WORK
*)
Check level of the replenishment containers (DEV&FIX)
*)
Check level of the waste containers (DEV&FIX)
*)
Select programme
*)
Feed through min. two green cleaning films - full size.
*)
During feeding films, always check the free-signal, given form the display.
*)
Ensure first rollers pull material.
*)
Feed large format films in straight.
*)
Put a leader on roll films
*)
Fold the leading edge on roll paper.
IN THE EVENING
*)
Turn off water supply.
*)
Switch off the main power switch of the Filmprocessor. (Main switch in position „0“)
*)
Open water drain tap to prevent algae growths in water tank.
*)
Lift the top cover to
prevent condensation
!!
Summary of Contents for M43ic
