![Industrex M43ic Instruction Manual Download Page 32](http://html1.mh-extra.com/html/industrex/m43ic/m43ic_instruction-manual_2054119032.webp)
Industrex M43ic / M43icN
page 26
01/2013 TK
5.9 AUTOMATIC START
The processor will start automatically when media is fed, except in case the developer is
too cold - more than 1ºC below the programmed. In this case, feeding the media will not start the
processor. Instead you’ll get the message
,
which will disappear after 2 seconds.
If you need to feed a film regardless of the low developer temperature, run the film
processor in manual mode.
5.7 MANUAL START/STOP
The manual start/stop is possible only when no media is being processed.
During the processing the corresponding menu items are not selectable - you
can’t move the cursor there.
To run the motor manually:
Press
5
With
6
,
move the cursor under
Start
and select it with
7
.
This will run the motor. The menu item Start changes to
Stop.
You can stop the motor by selecting
Stop.
When you start the motor manually, this will be indicated on the main page as
M1 instead of P1.
5.8 DISPLAY ILLUMINATION ON/OFF
In a dark room, it might be necessary to switch off the display backlight to prevent
exposure. The
1
button toggles the backlight on/off.
When the backlight is off, all the buttons except
1
are disabled.
This is done to prevent pressing buttons by accident in a dark room. Switching the
display off is a good idea if the filmprocessor is left unattended. This will reduce the
chances for unauthorized people to operate the filmprocessor.
Tank1 too cold
Summary of Contents for M43ic
