NetTEST II Menu Guide
24
©
COMSOFT
5.2.2.1.1 Test without PLC
Contrary to individual measurements, the test order instructed
by the
NetTEST II
must be considered. The cable tester
always instructs the user how to perform the next test. If a test
fails it can be repeated as long as the problem is fixed. The
failed test is only stored in the test protocol if the protocol
compilation is canceled at this point.
By means of the
key the single test is confirmed and
the protocol compilation continues. By means of
key
the protocol compilation is canceled.
5.2.2.1.2 Test with PLC
The test protocol compilation for the test with PLC is only
available with the option Online-Functions.
Contrary to the Test without PLC no test order must be
considered. All performed tests will be stored in the test
protocol. If a test is repeated only the last test result will be
stored. By the
key the test protocol compilation is finished
and the results are stored
Figure 17:
Screen ‘Test protocol with PLC’
Summary of Contents for NetTEST II
Page 1: ......
