System with online functionality
©
COMSOFT
75
8.8 Diagnostic event
Figure 73:
Screen ‘Diagnostic event’
The
Diagnostic event
is an extended function of the
Event
count
and provides the detailed analysis of an event.
NetTEST II
offers a selection of 6 different events that may be
triggered. With the occurrence of the selected event all
relevant data are displayed. Depiction is in plaintext as far as
possible, depiction in binary / ASCII mode is also possible.
The following events can be selected:
•
SET_PRM_REQ (Parameter data which the DP Master
transmits to the DP Slave)
•
CHK_CFG_REQ
(Configuration
data
which
the
DP Master transmits to the DP Slave)
•
SLV_DIAG_RES (Diagnostic data which the DP Slave
transmits to the DP Master)
•
DATA_XCHG_REQ (Output data transmitted to the
DP Slave)
•
DATA_XCHG_RES (Input
data
received from the
DP Slave)
•
GET_CFG_RES (Configuration data which the DP Slave
transmits to the DP Master)
By means of the
key the event count display or the
diagnostic event can be reset. The event count display is
updated by pressing the
key or after expiration of the
adjusted event update time (see chapter 8.9).
Summary of Contents for NetTEST II
Page 1: ......
