Operation of the Battery Charger
©
COMSOFT
77
9 Operation of the Battery Charger
The battery charger comes in two components: a desktop
battery holder and a plug charger. Connect the desktop holder
with the plug charger. Insert a
NetTEST II
battery into the
battery holder. Now plug in the charger plug into a 230 VAC
mains socket. Check the charging process by means of the
control LED of the battery charger, it is a “time charger”.
Charge time starts with mains ON and lasts for approx. 6
hours. During this time, the charge control lamp, is on (if a
battery is in the charger). When the charge cycle is finished,
the unit automatically switches over to maintaining charge.
The charge control lamp then blinks in the interval 5 seconds
“ON”, 20 seconds “OFF”.
Avoid quick insert / removal of the battery into the
battery holder, because the battery charger may be left in
an undefined state. Wait approx. 5s after removal before
you insert the next battery into the battery holder.
Summary of Contents for NetTEST II
Page 1: ......
