Communication with a PC
©
COMSOFT
39
6.5 Send file from NetTEST II to the PC
In order to, e.g. save parameter sets, data must be able to be
sent from the
NetTEST II
to the PC. In this case, proceed as
follows:
•
Connect
NetTEST II
via the serial connection line
(included in delivery) to the COM interface set in the
terminal application.
•
Start the previously configured terminal application on
your PC.
•
Click on Transmission - File receive... in the terminal
application.
•
Enter the directory over the subsequent browser, where
the file to be received is to be saved. Set the transmission
protocol to Kermit.
•
Start the transmission receive in the PC (e.g. Receive
button in the Hyper Terminal Dialogue).
Start the receive command in the corresponding menu in the
NetTEST II
.
Summary of Contents for NetTEST II
Page 1: ......
