Impulse Yamuna, Operation - And Safety Regulations

Page: 11 / 38

11
WARNING
Make sure nothing is covering any of the sides of the pump unit, because the sides
of the pump units are used to dissipate heat. The diesel driven pump unit also
uses the sides for the intake of combustion air and exhaust of combustion gases.
−
When pumping hot liquids, ensure that there is sufficient air circulation to prevent bearings and
lubricants from overheating.
−
Install the prescribed safeguard(s) in the correct manner.
4.2 Outdoor use
The Yamuna pump unit is suitable for outdoor use.
In addition to the general instructions, the following additional requirements must be met:
−
Ensure that there is sufficient free space around the air intake so the engine is able to draw as
much air as it needs.
−
Ensure that there is sufficient free space around the hot air outlet. Maintain at least 2 m (6.6 ft)
of clearance.
−
Avoid dusty conditions and locations where corrosion or erosion can occur..
.
4.3 Indoor use
In addition to the general instructions, the following additional requirements must be met:
−
Ensure that the area has adequate ventilation.
−
Make sure the exhaust gases are discharged outdoors.
−
Ensure that there is sufficient free space around the air intake so the engine is able to draw as
much air as it needs.
−
Prevent high ambient temperature and humidity.
−
Avoid dusty conditions and locations where corrosion or erosion can occur.