Impulse Yamuna, Operation - And Safety Regulations

Page: 26 / 38

26
4. Connect the lines.
5. If the pump is dry, the pump housing must first be filled with water.
6. Perform the daily maintenance.
7. Check whether there is sufficient fuel in the fuel tank.
8. Turn on earth switch (1)
9. Turn the switch on the control panel to position 2. The oil pressure and battery charging lamp
must light on.
10. Turn the switch on START position (3). Engine must starting.
WARNING
If vibration occurs during starting, stop the pump immediately and eliminate the
cause before starting again.
11. Let the engine run for five minutes before the pump is connected to the dewatering system.
12. If the engine does not start, press and hold the red handle on the oil-pressure protection. Start
the engine, and release the handle once the engine is running.