Impulse Yamuna, Operation - And Safety Regulations

Page: 22 / 38

22
7.1 Starting type (1)
The pump must be at a standstill before starting .
1. Check the pump type (type plate) and the characteristics of the pump unit, such as: speed,
operating pressure, consumed power, operating temperature, etc.
2. Check whether the pump unit is placed in accordance with the instructions. Pay particular
attention to the area around the pump unit. Make sure the pump unit can draw adequate fresh
air.
3. Check whether the prescribed safety provisions are in place.
4. Connect the lines.
5. If the pump is dry, the pump housing must first be filled with water.
6. Perform the daily maintenance.
7. Check whether there is sufficient fuel in the fuel tank.
8. Turn on earth switch (1)
9. Turn the switch on the control panel to position 2. The oil pressure and battery charging lamp
must light on.
10. Turn the switch on START position (3). Engine must starting.