Impulse Yamuna, Operation - And Safety Regulations

Page: 28 / 38

28
9. ECOMIZER-PRO (type3)
The ECOMIZER-PRO controller is located at the middle panel. It is connected with the
pump and engine by the 2 plugs at the bottom of the control box. This allows the user
to easily remove the middle panel during maintenance
•
To start the ECOMIZER-PRO:
turn the “Off-On-Start” switch on the control box in the “Start”
position.
•
Release the switch and wait until the start screen appears. When no further actions are made
during the shutdown relays (2 minutes on default) the ECOMIZER-PRO will switch itself into
Stand-By. To reactivate the ECOMIZER-
PRO the user has to turn the switch on “start” again,
or when applied (optional), the pump can be started by Remote Control.
•
The “Off” position will shut down the Pump Unit completely. This position can be used as
emergency stop. Make sure the ECOMIZER-
PRO is “Off” while maintaining, repairing,
transporting or being stored.
Starting screen