NanoPhotometer
®
P-Class
User Manual
Version 2.1
Page 29 / 70
Calibration Screen (manual entry)
Results screen
Calibration Screen (manual entry)
Shows previously entered calibration values and allows
values to be entered via the keypad.
Step 22
The highlighted box can be edited in order to enter an
absorbance value corresponding to a given concentration
value using the keypad numbers. Range is 0.001 to
9,999. Use C to backspace and clear the last digit entered
and the up and down arrows to move between boxes.
Step 23
Press
OK
to accept the calibration and go to the
Results screen (see below) OR press
Back
to return to
the Standards screen.
Results screen
Step 24
Insert the reference sample and press
Blank
key. This will
be used for all subsequent samples until changed.
Step 25
Insert the sample and press
Sample
. The
concentration of the sample is taken and displayed.
Step 26
Repeat for all samples.
Step 27
Press
Menu/Options
to display available Options which
are described below.
Step 28
Press
Escape
and confirm with
Yes
to return to the
Protein
folder. Query needs confirmation to avoid
unintended escaping the application.
NanoPhotometer
®
P 300
Options (select using key pad numbers)
NanoPhotometer
®
P 330 / P360
Menu (select using key pad numbers)
Options (select using key pad numbers)
1) Return to parameters screen.
2) Print result via selected method.
3) Toggle graph on/off. Displays the calibration graph, cursors
give values for last measured sample.
7) Sample number – add a prefix to the sample number and
reset the incrementing number to the desired value.
8) Save method – use the left and right arrows to select a folder
to store in (User Methods 1-9), press the down arrow and enter
name.
9) Open printer settings, possibility to change the printer settings
within the method as described in 7.3 Output Options / Printer
Exit
Options
by pressing
Escape
, or wait.
Menu (select using key pad numbers)
1) Return to parameters screen.
2) Transfer the results via selected Output Options.
7) Sample number – add a prefix to the sample number and
reset the incrementing number to the desired value.
8) Save method – use the left and right arrows to select a folder
to store in (User Methods 1-9), press the down arrow and enter
name.
9) Open Output Options settings, possibility to change the Output
settings within the method as described in 7.3 Output Options
/ Printer
Exit
Menu
by pressing
Escape
, or wait.