Impacts S210E, Operating Manual

Page: 5 / 48

Operating Manual S210E
3
Chapter 2.0 Safety Instructions
2.1 Explanation of Warnings and Symbols
2.2 Organizational Measures
2.3 Personnel Selection and Qualification
2.4 Safety Precautions Applicable to Different Operating Conditions
2.5 Repair Work, Maintenance Activities, and Default Repair on the Job Side
2.6 Definition of the Safety Off Position
2.7 Dangerous Aspects of the Machine
2.8 Electrical Engineering Regulations
2.9 For Special Attention
2.1 Explanation of Warnings and Symbols
The following symbols are used in the operating instructions to highlight areas of
particular importance:
Operational Safety
This symbol will be shown in these Operating Instructions next to all safety precautions that
are to be taken in order to ensure prevention of injury. Follow these instructions and take
special care in these circumstances. In addition to these instructions, the general safety
precautions and the local accident prevention guidelines also should be followed. Please
check if there are special regulations for the particular job site.
Safety Goggles/ Ear Protection
Information, instructions, and restrictions with regards to possible risks of personal injury or
extensive damage to materials.
Electrical Warning
Warning against dangerous voltages.
2.2 Organizational Measures
The Operating Instructions are to be kept near the machine and must be reachable
all the times!
In addition to the Operating Instructions, general and legal regulations regarding accident prevention
and environmental protection must be indicated every time.
Such duties may, for example, relate to the handling of hazardous substances or to the provision and
wearing of personal protection equipment as well as compliance with local traffic regulations.