Impacts S210E, Operating Manual

Page: 14 / 48

S210E Operating Manual
12
A wire mesh is fitted on the bottom of the abrasive
hopper to prevent any coarse contaminants from
getting into the blast wheel. For cleaning the wire mesh,
open the separator only if the motor is shut off
(See Safety off position in Chap. 2).
1 Closing Clamp
2 Wire Mesh
3 Deflector
4 Dust Hose Connection
3.7 Abrasive feed
In order to control the abrasive flow toward the blast
wheel, there is a magnetic valve incorporated between
the abrasive storage hopper and the feed spout.
Any change in the opening of the magnetic valve
causes a change of the amount of abrasive fed to the
blast wheel.
The valve is hand operated via a control cable and can
be set to each amount of abrasive throughput.
The maximum blast efficiency is reached, if the handle
(dead man's handle) is totally pulled up and therefore
the magnetic valve is open in a right angle.