Impacts S210E, Operating Manual

Page: 13 / 48

Operating Manual S210E
11
3.5 Blast Wheel
The heart of the blast machine is the blast wheel
(1), which throws abrasive onto the surface. The
blast wheel is placed in a protective housing with
replaceable wear plates (6). The blast wheel is driven
by an electrical motor via an wheel hub (5).
1 Blast Wheel
2 Control Cage
3 Feed Spout
4 Magnetic Valve
5 Wheel Hub
6 Lining System
7 Blast Wheel Impeller
Around the centre of the blast wheel there are 4
notches, the impeller (7). It is feeding dosed quantities
of abrasives onto the blades of the turning blast wheel.
On top of this is the control cage (2) which, once it is
carefully set, regulates the flow of abrasive.
3.6 Separator
The separator is mounted to the end of the rebound
plenum. The separator separates the abrasive from
contaminants and feeds the cleaned abrasive back
to the abrasive circuit.
1 Separator
2 Wire mesh
3 Clamp
4 Deflector
5 Dust Hose Connection