Impacts S210E, Operating Manual

Page: 34 / 48

S210E Operating Manual
32
7.10 Recommended Spare Parts List
To avoid long standstills of the machine, IMPACTS recommends to keep the following spare parts in
stock.
Part Number Description Amount
201000145 Wheel kit 2
201000201 Top liner 1
201000199 Liner R.H. 1
201000200 Liner L.H. 1
201000202 Brush seals, side 2
201000203 Brush seals, front 2
201000186 Felt seal ring 1
201000210 Blast wheel nut 1
201000204 Abrasive control cable 1
As a special service to customers, IMPACTS offers a tool kit which contains all the above listed parts
and in addition to that the most important tools for maintenance work.
After the change of any spare parts, you should always adjust the blast pattern.
Only this will guarantee your machine will work most efficiently and save
unnecessary wear and repair costs.
Chapter 8.0 Electrical System
8.1 Tips for the Electronics
8.2 Circuit Diagram
8.1 Tips for the Electronics
Completely shut off the machine for repair or maintenance work. All plugs have to
be disconnected. Keep all cables and plugs near the machine in order to prevent
the machine from being switched on accidentally.
Electric spares need to be ordered with reference to the electrical circuit diagram within this chapter. If
there is any doubt, you need to call your local IMPACTS service technician.
The electrical parts must be inspected regularly. Please note in particular the specified recurring inspec-
tions according to VBG 4 or other local regulations. Defects such as loose connections or scorched
cables must be rectified immediately. Call a skilled electrician or the IMPACTS customer service.
Work on the electrical parts of the equipment have to be undertaken by a skilled
electrician or by a trained person under the guidance and supervision of a skilled
electrician in accordance with the electrical engineering regulations.