Impacts S210E, Operating Manual

Page: 19 / 48

Operating Manual S210E
17
4.3 Transportation of the Machine with Hoisting Equipment
When transporting the machine with hoisting equipment like a crane or a
lift, check the total weight permitted (Chapter 1.2 dimensions).
Please use only appropriate, allowed and qualified hoisting equipment
(2) as well as ropes and chains (1). You will find the weight of the
equipment in chapter 1.2 or on the serial plate on the machine.
Do not fix any rope or chain (1) to the handle (3), The handle is only
fixed with two fixing screws and cannot at all been used for transport or
to fix ropes or hoisting equipment!
4.4 Transportation of the Machine by Vehicles
When transporting the machine with vehicles,
proceed in such a manner that damage due to
the effects of use of force or incorrect loading
and unloading is avoided. Use straps (1) to
tighten the machine to the cabin of the vehicle.
Use at least two straps, or tighten the machine
with one straps to the cabin wall of the vehicle.
Make sure, that all parts of the machine are
fixed.
To reduce the height of the machine, you can
slide the handle (2) down. In order to achieve
this, you have to loosen the two fixing screws (3)
and to slide the handle down. Do not forget to fix
the fixing screws again, otherwise you will lose
them.
4.5 Moving the Machine during Blasting Work
Please refer to Chapter 5 - Start Up.