1
STVZSkW ed 09/08
VICTRIX ZEUS Superior kW I
Technical Documentation
Technical Documentation
VICTRIX ZEUS Superior 26-32 kW I
Wall-mounted, fan-assisted condensing boiler
with domestic hot water storage tank
VICTRIX ZEUS Superior 26 kW I
VICTRIX ZEUS Superior 32 kW I
VICTRIX ZEUS Superior kW I is a wall-mounted, sealed
chamber, fan-assisted generator (type C) for central heating and
the production of domestic hot water with storage tank.
The VICTRIX ZEUS Superior kW I range are type-approved
for installation outside the building in a partially protected
place.
N.B.: A partially protected location is one in which the appliance
is not exposed to the direct action of the weather (rain, snow,
hail, etc..).
The boiler can also be installed in the B
23
configuration using
the relevant kit (optional).
The appliance is available with useful heat output of 21.0
kW(25.8 kW in DHW mode) and 32 kW which, thanks to
condensing technology, distinguishes itself due to its high
efficiency and large field of modulation (from 20 % to 100 %
of the nominal heat output).
The boiler has a total premix combustion system that gua-
rantees particularly reduced pollutant emissions and allows
functioning with natural gas or LPG.
Adjustment and control are entrusted to an integrated P.C.B.
with micro processor with continuous flame modulation by
means of 3 sensors (1 DHW and 2 CH).
The new electronics allows the connection of the appliance
to the Comando Amico Remoto remote control and to the
Super Comando Amico Remoto remote control;
both allow
to easily manage and check the boiler at a distance. Moreover,
the Super CAR allows the display of the relative humidity of
the room and the weather forecast.
General features.
Using the Super CAR it is possible to indifferently vary some
settings from the boiler control panel and from the Super CAR
control panel, such as: selection of Summer Winter, DHW set
point, DHW comfort status, Reset.
The boiler has an
anti-freeze safety device as per standard
that protects it to a minimum temperature of
-5°C
(optional
to -15°C).
The hydraulic circuit has a water-gas heat exchanger with
coil in STAINLESS STEEL and uses the new hydraulic unit
composite material which, as well as the pump and electric
3-way valve that according to necessity allow boiler water
to circulate in the CH system or in the storage tank coil for
the production of DHW, also houses the hydraulic control
devices (absolute system pressure switch, 3 bar safety valve, system
adjustable by-pass, etc...).
The boiler functioning parameters are set using the buttons
and knobs while display of the status, functioning mode and
anomalies takes place on the back-lit digital display.
The VICTRIX ZEUS Superior kW I boiler must be installed
using the intake/exhaust kits or the ducting systems (Ø 60 mm
rigid, Ø 80 mm rigid and Ø 80 mm flexible) realised in plastic
and designed expressly for Immergas condensing boilers.
Summary of Contents for VICTRIX Superior 32 kW X
Page 2: ......
