83
71
4.6 PARAMETERS FOR FILLING IN THE PACKAGE
FICHE.
In case you should wish to install an assembly, starting from the
Victrix Hybrid, use the assembly charts in Fig. 73.
To complete it properly, fill the relevant spaces (as shown in the
package fiche facsimile (Fig. 71) with the values shown in tables
(Fig. 72).
Facsimile for filling in the package fiche for room central heating systems.
The remaining values must be obtained from the technical data
sheets of the products used to make up the assembly (e.g. solar
devices, integration heat pumps, temperature controllers).
Use board (Fig. 73) for “assemblies” related to the central heating
mode (e.g.: temperature controller).
N.B.:
since the product is supplied by default with a temperature
controller, the package fiche must always be filled in.
Room central heating seasonal energy efficiency of the heat pump
1
%
Temperature control
From temperature
control board
Supplementary boiler
From boiler board
Water heating energy efficiency class in colder and hotter climate conditions
The energy efficiency of the set of products indicated in this sheet may not reflect the actual energy
efficiency after installation since such efficiency is affected by additional factors, such as the heat loss
in the distribution system and the size of the products compared to the size and features of the building.
Water heating energy efficiency class of the set in average climate con
-
ditions
Water heating energy efficiency class of the set in average climate conditions
Solar contribution
From the board of the solar device
Class I = 1 %, Class II = 2 %,
Class III = 1,5 %, Class IV = 2 %,
Class V = 3 %, Class VI = 4 %,
Class VII = 3,5 %, Class VIII = 5 %
2
%
+
3
%
-
Seasonal central heating energy efficiency
(in %)
( - ‘I’ ) x “II” =
4
5
%
%
+
Dimensions of the
manifold (in m
2
)
Volume of the
tank (in m
3
)
Efficiency of the
manifold (in %)
Classification of the
tank
A* = 0,95, A = 0,91,
B = 0,86, C = 0,83,
D-G = 0,81
( ‘III’ x + ‘IV’ x ) x 0,45 x ( / 100) x
=
%
%
5
5
‘I’
Colder:
- ‘V’ =
Hotter:
+ ‘VI’ =
G
F
E
D
C
B
A
A
+++
A
++
A
+
< 30 % ≥ 30 % ≥ 34 % ≥ 36 % ≥ 75 % ≥ 82 % ≥ 90 % ≥ 98 % ≥ 125 %≥ 150 %
