IMI PNEUMATEX Pleno PI 6.1, Installation Manual

Page: 72 / 100

72
de
fr
en
nl
Technical data
y
The data on the TecBox type plate and the data given below should be compared with the design and system parameters.
There should be no inadmissible deviations. Full technical information is available in the Datasheet Pleno (Print) and on the
internet at www.imi-hydronic.com.
Terms
PED2014/68/EU
PS : ..... bar Max. admissible pressure, as on type plate
TS : 30 °C Max. admissible temperature
TU : 40 °C Max. admissible ambient temperature
EN 60335
PA/U/F : ..... kW / ..... V / ..... Hz Electrical load/voltage/frequency, as on type plate
IP : ..... EN 60529 protection class of TecBox, as on type plate
Media
Water/water mixtures with up to 50% antifreeze
Working pressure range DPP
Pleno PI_ TecBoxes should be operated only within the stated working pressure range DPP.
Mode fillafe* Initial filling*
Type DPP [bar] DPP [bar]
PI 9.1 1,0 – 8,0 0 – 8,0
PI 6.1 | PI 6.2 1,0 – 5,5 0 – 5,5
*
:
pages 58 | 68