IMI PNEUMATEX Pleno PI 6.1, Installation Manual

Page: 51 / 100

51 51
de
fr
en
nl
Table of contents
Page
Scope of delivery
52 Basic equipment
52 Additional equipment
Operating
53 Function • TecBox | Additional equipment
54 | 55 Set-up • Wiring diagram | TecBox 3D drawing
56 – 59 BrainCube control • Setting Function | Parameters | menu | Messages
Installation
60 TecBox • Installation | Installation procedure | Example installation
61 Connecting pipes DN • To TecBox | Standard values
62 | 63 Electrical connection • Requirements | Power supply connections | RS 485-1 | ComCube |
Water make-up through RS 485-1
64 Terminal plan • BrainCube
Start-up (IBN)
65 Requirements • Consumer system ready!
65 BrainCube • Switching on | Follow instructions on the BrainCube
65 | 66 Welcome - initial start-up • Welcome - Set language, date, time
• Initial start-up as described in the instructions
• Select
standby
or
auto
• Set parameters on the BrainCube
67 BrainCube with ComCube DCD • Follow the separate ComCube Installation | Operation instructions
67 BrainCube with ComCube DCA • Sensors | Signals | Evaluation
• Follow the separate ComCube Installation | Operation instructions
67 Water make-up through RS 485-1 • Set parameters on the BrainCube of Transfero, Compresso
Operation
68 Basic principles
68
auto
• All functions activated | keep in auto mode all year round
68
standby
• Display active only |Carrying out maintenance
68
menu
• Functions selectable, testable and modifiable
68
check
• Maintenance and functional test:
Recommended once a year by IMI Hydronic Engineering’s Customer
Service
69 Messages • View, acknowledge | Message list | Correcting technical faults
70 Inspection | Disassembly • As required by regulations in the country concerned
• The system must be depressurised first!
71 Safety
Technical data
72 Terms | Media
72 Working pressure range
99 CE conformity