IMI PNEUMATEX Pleno PI 6.1, Installation Manual

Page: 61 / 100

61 61
de
fr
en
nl
Mains water pressure
p
NS
= 2...10 bar
by contractor
DN1
Pleno PI_
1
Statico
DN2
Mains water pressure
p
NS
= 2...10 bar
by contractor
DN1
Pleno PI_ Compresso C
1
DN2
Mains water pressure
p
NS
= 2...10 bar
by contractor
DN1
Pleno PI_
Transfero T
1
DN2
Installation -
DN | SNS connections
Connection
• It is connected directly to the consumer system, preferably on the suction side of the circulation pump, behind the pressure
maintenance and in the direction of flow.
• The DN connections should be flexibly connected to the TecBox (1). DN1 does not require any additional shut-off valves.
The TecBox has integrated lock shield/ball valves.
• The customer should have a strainer and shut-off valve fitted to the DN2 mains water connecting pipe.
Standard values in mm for Pleno PI_ connecting pipes
DN1 DN2
Length up to about 5 m Nominal diameter 25 15
Length up to about 10 m Nominal diameter 25 20
Length up to about 30 m Nominal diameter 32 25
Examples: Pipe connections
Pleno PI_ with Statico
Pleno PI_ with Compresso
Pleno PI_ with Transfero