IMER INTERNATIONAL S.p.A.
H110VF - H110VR
26
Dear Customer,
Thank you for choosing this IMER product, which is the result of years of experience.
The H110 sawing machine combines maximum reliability with innovative technical solutions.
In this manual you will
Þ
nd all the information you need for making optimum use of the product with the highest
possible degree of safety.
We recommend that you read the instructions carefully and keep this manual in a safe place for future refer-
ence.
Enjoy your work!
CONTENTS:
GENERAL TECHNICAL INFORMATION
page 25
GENERAL SAFETY REGULATIONS
page 26
SPECIFIC TECHNICAL INFORMATION
page 27
USING THE WORKPIECE PUSHER
page 30
TRANSPORT AND MAINTENANCE
page 31
REPLACEMENT PARTS
page 32
WARRANTY
page 34
EC DECLARATION OF CONFORMITY
last page
Key to the symbols:
Generic danger.
Electrical danger.
Danger of crushing upper limbs.
Use of ear defenders is compulsory.
Use of protective goggles is compulsory
Check to be carried out very carefully before using the machine.
Note:
The emissions levels given in the technical data do not necessarily represent safe working levels. While
there is a link between levels of emission and levels of exposure, it must be determined whether further pre-
cautions are to be taken. The factors that in
ß
uence the worker’s real level of exposure include the duration of
exposure, the characteristics of the working environment and other sources of dust, noise etc., i.e. the number
of machines and other processes going on in the vicinity. Permitted levels of exposure can also vary from one
country to another. In any event, this information will enable the user of the machine to make a better assess-
ment of the risks and dangers involved. The following rules must be scrupulously observed to prevent increasing
the noise level over time:
•
Regularly check and replace the processing tools and their mounting equipment.
•
Observe the speci
Þ
ed maintenance schedule.
GB
O
R
IG
IN
A
L
I
N
ST
R
U
C
T
IO
N
S
