SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 122
Typical Contaminants
Contaminant
Comments
Dust particle, 1 micron
Can block up to 1% of the light
transmission, creating a loss of 0.05 dB
Dust particle, 9 microns
Although microscopic, the particle can
completely block the fiber core
Human hair
Typically 50 to 75 microns in diameter
Oil
Frequently caused by touching
Film residues
Can accumulate from vapors or smoke
Powdery coatings
Can be left behind after water or other
solvents evaporate
Important Points
•
Before you begin cleaning, always inspect the fiber connections.
•
Inspect and clean both fiber ends every time you make a connection.
•
Keep a protective cap on unplugged fiber connectors.
•
Do not touch the end of a fiber.
•
Store unused protective caps in a clean resealable container, located nearby for easy access.
•
Do not reuse cleaning tissues or swabs.
•
Do not allow alcohol or another wet cleaning agent to dry on a fiber end.
•
Never touch the dispenser tip of an alcohol bottle or any clean portion of a tissue or swab.
•
Use care when handling the fiber; do not twist or pull.
•
Keep your cleaning fluids away from open flame or spark.
