SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 38
http://137.237.173.15/mib/slot7/snmp.mib
Accesses the MIB for slot
7
from
137.237.173.15
Composite Decoder
Analog Input Pedestal
disables the input analog video pedestal for Japanese NTSC (default is
Yes
).
3D Comb Decoding
enables 3D comb filtering for composite video inputs (default is
On
).
Analog TBC
enables time base correction for analog video inputs (default is
Off)
.
Note
: Selenio accepts PAL-M composite video that complies to ITU-R BT.470-6 standard (with burst
amplitude of 300mV), as well as a variant that is used commonly in Brasil (with burst amplitude of
287mV). Ensure that you select the correct PAL-M standard for detection. An incorrect standard setting
will distort the color level of the video. To select the PAL-M standard for detection, follow
Misc > Others
> PAL-M Standard
, and then select either
Brasil
(default) or
ITU-BT470-6
.
Video Input
The following topics are covered in this section:
•
Input Routing (on page
38
)
•
Auto Routing (on page 39)
•
EDH-CRC-SQM 1 and 2 (on page 39)
Note
: EXT Video inputs and outputs can be disabled by the
Green-Power Save
control (
Misc > Green-
Power Save
). If an external video control is grayed out in the user interface, check its power save status.
Input Routing
Processing Channel
x
Source
sets the input video source for the selected processing channel. Options
are:
•
Auto (see Auto Routing (on page
39
))
•
CTR SDI 1 (the currently operating controller)
•
EXT Vid 1 (default; from external SDI 1 In fiber or HD-BNC connector)
•
EXT Vid 2 (from external SDI 2 In fiber or HD-BNC connector)
The FS1 and XD1 are available with one of the following back module input configurations:
•
Two optical SDI SFP inputs
•
Two SDI or analog (High-Density) HD-BNCTM inputs
These modules also receive inputs from either the primary or secondary controller module.
