Platinum™ Predator II-GX 2RU
Chapter 4
Installation and Operation Manual
Using ZConfigurator
© 2014 Imagine Communications.
Proprietary and Confidential.
Edition E | Page 84
Copying Settings to Other Units
System Settings and Layouts can be copied to other Predator
II
GRFPredator II GX units by using the
Replicator
function. In addition, multiviewer
Profiles
may be saved to local storage and loaded at any
time to any multiviewer (of the same type).
To access the
Replicator
and
Profile
functions navigate to
System Settings >> Replicator
.
Replication
Replication requires that a target multiviewer is connected to the network and that its IP address is
present in the
Destination Multiviewer List
.
1.
Highlight the desired multiviewer to receive the
current
multiviewer settings.
2.
Then select
System Settings
and/or
Layouts
and click on
Replicate
.
This will duplicate the chosen settings across the network to the target unit.
When Replicating or using Profile Load and Save the target multiviewers should be of the same type as
the source.
Settings not applicable to the destination unit will be ignored.
