Platinum™ Predator II-GX 2RU
Chapter 4
Installation and Operation Manual
Using ZConfigurator
© 2014 Imagine Communications.
Proprietary and Confidential.
Edition E | Page 60
Select the
Display
tab and click
Configure
.
It lists the manufacturers of the available output modules on your system.
The models and resolutions supported depend on whether Single Head Mode or Dual Head Mode (Dual
Head Card only) is selected.
Dual and Single Head configurations
Select single head mode for each display output to be a clone of the other.
Using independent outputs and spanning
Select
Dual Head Mode
for two independent outputs or one virtual output
Select the required
Display Orientation
.
Check allow spanning to allow one image to be spanned across two displays (first available
horizontal configuration only)
Setting display model/resolution
In the
Manufacturer
list, select the appropriate manufacturer name or select
Generic
for a list of
industry standard resolutions.
Select the desired
Model
or
Resolution
.
Select
59.94Hz
or
50Hz
to match source refresh rate and attached display.
Click
OK, then
click
OK
on the
System Setup
dialog box to save changes.
