Configuration and Status Parameters
December 3, 2008
H A R R I S C O R P O R A TI O N
| I P A 68 0 0 + A S I O N I P V I D E O G A T EW A Y
Release 1.2.0 | Page 30
6.2.3
Status Parameters
Table 6-2 Status Parameters
Status/Ethernet
Description
Options
Default
Status/Ethernet/Link
Indicates the state of the Ethernet's physical connection.
lost, negotiating,
10h,10f, 100h,
100f, 1000
—
Status/Ethernet/RX Pkts
Indicates the number of packets received in the last second.
Counter
—
Status/Ethernet/TX Pkts
Indicates the number of packets transmitted in the last second.
Counter
—
Status/Ethernet/RX Err Pkts
Indicates the number of errored packets received in the last second.
Counter
—
Status/Ethernet/MAC Addr
Displays the Ethernet MAC address.
MAC Address
—
Status/Encapsulator_[1–2]
Description
Options
Default
Status/Encapsulator_[1–2]/LOS
Indicates if the encapsulator is experiencing a loss of signal.
fault, noFault
—
Status/Encapsulator_[1–2]/Input
Indicates the type of encapsulator input.
ASI-188, ASI-204,
—
Status/Encapsulator_[1–2]/TX IP Rate
Indicates the encapsulator's transmit rate; in bits per second (bps).
Counter
—
Status/Encapsulator_[1–2]/TX IP Pkts
Indicates the number of IP packets transmitted since the last reboot or
reset.
Counter
—
Status/Encapsulator_[1–2]/Dest [1
–
4]
Description
Options
Default
Status/Encapsulator_[1–2]/Dest_[1–4]/Status
status
working, unreachable,
noArp, ttlExceeded,
sourceQuench, unused
—
Status/Encapsulator_[1–2]/Dest_[1–4]/TX Err Pkts
txErrPkts
Counter
—
Status/Encapsulator_[1–2]/ASI
Description
Options
Default
Status/Encapsulator_[1–2]/ASI/RX TS Rate
Received Transport Stream Rate
Counter
—
Status/Encapsulator_[1–2]/ASI/RX TS Packets
Provides a count of trasnport stream packets received.
Counter
—
Status/Encapsulator_[1–2]/ASI/8b10bErr
Provides a count of 8b10b errors.
Counter
—
Status/Encapsulator_[1–2]/ASI/Sync Err
Provides a count of synchronization errors since the last boot or power
up.
Counter
—
Status/Encapsulator_[1–2]/ASI/TS Pres
Indicates whether or not a transport stream is present.
present, notPresent, n/a
—
Status/Decapsulator_[1–2]
Description
Options
Default
Status/Decapsulator_[1–2]/Output
Indicate the packet size of the current, configured output.
ASI-188, ASI-204,
unknown
—
Status/Decapsulator_[1–2]/Uncorrectable
Provides a count of uncorrectable packets.
Counter
—
Status/Decapsulator_[1–2]/Corrected
Provides a count of the number of corrected packets in the incoming
transport stream.
Counter
—
Status/Decapsulator_[1–2]/TsRate
Indicates the current transport stream rate.
Rate
—
Status/Decapsulator_[1–2]/CBRLock
Indictaes the module has locked onto the ASI input.
Locked, NotLocked
—
Status/Decapsulator_[1–2]/FecPeriod
Indicates the FEC period setting.
Value
—
Status/Decapsulator_[1–2]/FecOrder
Indicates the FEC order setting.
Value
—
Status/Decapsulator_[1–2]/PktSize
Indicates the packet size of the incoming transport stream packets.
Int
—
Status/SYS
Description
Options
Default
Status/SYS/Software Version
Firmware revision number.
#.#.#
—
Status/SYS/Hardware Version
Indicates the hardware revision number.
1 to 32
—
Status/SYS/Manufacturing Date
Indicates the module’s manufacturing date.
yyyy-mm-dd
—
Status/SYS/Serial Number
Indicates the module’s serial number.
String
—
