December 3, 2008
H A R R I S C O R P O R A TI O N
| I P A 68 0 0 + A S I O N I P V I D E O G A T EW A Y
Release 1.2.0 | Page 19
Chapter 4: Firmware Upgrade
4
4.1 How to Upgrade Firmware
Note:
If a previous upgrade was interrupted and the module will not boot correctly, or if the module is in an inoperable state,
(1) Move the toggle switch to the ‘up’ position.
(2) Re-insert the module to cause it to boot in ‘safe mode’.
(3) Proceed with the following upgrade procedure.
(4) When the upgrade procedure is completed, move the toggle switch back to the ‘center’ position.
Procedure
1
Install the appropriate upgrade package from the CD-ROM or download it from one of the Harris web sites:
http://
www.broadcast.harris.com/support/
and
https://premier.harris.com/broadcast/.
2
In CoPilot, Pilot, or Navigator choose
Tools
>
Software Upgrade
. The
Software Upgrade
dialog opens and is brought into the
foreground.
Figure 4-1 Software Upgrade Dialog > New Transfer Tab
3
On the
New Transfer
tab, click the
Add
button on the right. The
Device Selection
dialog opens.
Device Options
provide access to
options for entering Telnet and FTP
user name and password, and creating
automatic backups.
Package Info
includes a list of the
components contained in the ZIP file.
